Silver and gold necklace

I managed to start and finish a piece of silver jewellery in just a couple of weeks rather than a few months or a year or more!  OK, so I started it back in July before the summer break, but technically it was only a few weeks!  

I thought I had some process photos of this necklace, but I can't find them so maybe I don't.  I used argentium, which I used before making my brother's ring, and again I used pieces of my mum's wedding ring.

I pierced out the five pieces of argentium in varying sizes and cleaned them up.  I punched the circles from mum's wedding ring using the hydrolic press and my circle punch kit.  The original idea was to completely inlay them into the silver batons, as I did with my brother's ring.  After fusing the gold to the argentium, I loved the way they protruded, so decided not to roll them in.

I bought some thin tube and the omega chain, then cut the tube to fit the backs of the batons.  I soldered them in place before cleaning everything up.  I then cut more pieces of tube to act as spacers.

You can see them on the photo above.  Then it was just a case of threading everything on to the chain and resoldering the clasp.  Job done!  This is a necklace I will treasure.

A present for a friend

I am now at that age where my friends are turning 40.  Yes, I'm 40, good guess!  It was my oldest friend's 40th last weekend, 2 weeks before the event I suddenly realised I needed to buy her a present.  She's not an easy person to buy for... I decided something handmade would be more suitable.

I'd been thinking about an idea of making a pendent using 3 different size circles.  I cut them out of 1mm thick sterling silver sheet using a circle punch.  The mid-sized circle was left blank.  The larger and smaller circles were texturised before punching them out.

The smallest circle is patterned using a centre punch and hammer to make tiny indentations.  The largest circle was rolled through the rolling mill with a skeleton leaf.  I adore this pattern and have it in mind for some future makes.  As the pieces had burrs after punching, I had to file and sand to clean them up.  The smallest circle got a stick soldered to the reverse and the larger two had holes punched through.

This "stick" (a piece of 0.8mm round wire) was inserted through the other 2 circles, then I just used the round nosed pliers to make a bail before filing and sanding the edge.

It was really hard to take photos as I had put it in the barrel polisher, meaning it's very shiny!  I've just put it on a bought trace chain, also in sterling silver.  

This was a pretty quick make.  When I told my tutor my plans, she said I could get it done in half a session.  It actually took me a session and a half, but I work really slowly and do rather a lot of talking and eating!

Oh, and yes, the friend liked it!